You have no items in your shopping cart.
- 1/4" shaft diameter
- 6 year warranty
- 1 AA battery required
- Built-in hanger holds up to 4 lbs
- Hand mounting hardware not required
- Free pair of hour/minute hands, select after you add movement to cart
- Designed for use with a Group A sweep second hand
Case Size: 2 7/32" square x 5/8"DView Quartz Movement Specifications
|Total Hand Shaft Length||No|
|Maximum Dial Thickness||No|
Quartex® Push-On Quartz Clock Movement, Non-Threaded is rated out of 5 by 61.
Rated 5 out of 5 by Fox and Finch Antiques from My Klockit Review I read all of the information on line about how to order the parts to make several antique clocks into quartz driven clocks. I thought I had it figured out, but when they arrived I did't think any of them would work. I drove over to the Klockit location in Lake Geneva and Jillian was so patient and helped me straighten out the whole thing. When I walked out of there, I knew I had the write products and she even numbered the the hands and taped them to cardboard to keep me on track. If she will help me with the next batch, I will do a lot more of this change over. It is a good way to recycle old-non working clocks and they are so simple to put together that it makes it worthwhile. Jillian is essential to the accomplishment; this can be tricking to order the right size shaft. She made the whole thing easy and was so nice. I'm writing about Klockit on my next blog post and I'll link it to your website.
Date published: 2016-02-14
Rated 4 out of 5 by Fmgreen from Exactly what I needed The movement fit the existing hole in my clock face but my previous hands did not fit the movement. The movement came with a set of hands of which I could choose from a select variety but I did not receive my chosen selection. The new hands fit my new movement but are too small for my clock face. I am happy to have my clock working but I can not read it from across the room.
Date published: 2016-01-30
Rated 5 out of 5 by Hank8 from Fit perfectly, works - a happy customer There is no more to be said. It's a clock motor - and it fits and works.
Date published: 2016-01-25
Rated 4 out of 5 by granny fixer from Clock works Clock works was easy to install and has been working fine. I was disappointed that the hands from the replaced clock works didn't fit on the stem of the new one and the new hands are really ugly. They were too long and too big for the 3 inch diameter clock face so I cut them off with scissors. Still too big and ugly, but easy to read. I had to make a choice of hands but there wasn't much information about each so I guess I made the wrong choice. Be careful which hands you choose!
Date published: 2016-01-29
Rated 5 out of 5 by Rodbuilder from Replaced a Swiss Quartz movement I was searching for a replacement quartz movement for a clock that my daughter loves and wanted to keep. They are almost impossible to find and a bit pricey so when I stumbled on the Klock-it website and saw how detailed their descriptions were I had to try one of theirs that was close to the same dimensions. When I got and installed it in the clock I was pleasantly surprised that the old hands fit the new movement so it looks and works just like it did when it was new. Thank you Klock-it!!!
Date published: 2016-08-06
Rated 5 out of 5 by None64 from Exactly what I needed. Bought this item in order to repair/restore a mantel clock that we purchased a number of years ago. The clock itself was not expensive, but we had become attached to the clock and having it on our fireplace mantel. Didn't want to throw it out and didn't want to spend a fortune to get it fixed. With this part and a little patient DIY on my part, I was able to restore/repair the mantel clock to working order. Thanks.
Date published: 2016-03-20
Rated 5 out of 5 by dkc1967 from Used to restore dash clock i didn't want to spend well over $100 to replace the factory clock in my 1968 mustang, so while I had the dash out, I removed all the factory components and installed this clock in place of the old shorted out one. I ended up fabricating the hands by cutting away and just using the push-on pieces and using wire for the hands. I will post photos in a follow up.
Date published: 2016-03-02
Rated 5 out of 5 by Dash S from Found what I needed. I needed a replacement movement for a 25 year old Seiko mantle clock for my 86 year old mother-in law. Klockit was the only place that had the particular one that would fit and let me use the original hands. I only needed to trim the mounting posts and it snapped right into place. The great selection of parts at Klockit made an elderly woman very happy.
Date published: 2016-10-27