You have no items in your shopping cart.
- 5/16" shaft diameter
- 1 year warranty
- 2 C batteries required
- Hand mounting hardware included
- Free pair of hour/minute hands, select after you add movement to cart
- Designed for use with a Group B sweep second hand
|Total Hand Shaft Length||No|
|Maximum Dial Thickness||No|
Tubular Quad Chime Quartz Clock Movement is rated out of 5 by 11.
Rated 5 out of 5 by Phreshout from The great features mean heads turn when it chimes! Although a bit pricey for my little project, I decided to go ahead & put this unit in a mechanical movement regulator wall clock case. It fit easily, with an extra shortening of the pendulum. A friend heard it chime, & rounded the corner into the family room, expecting to see a grandfather clock. He was completely blown away! When we have guests, I switch from Bim Bam to Westminster. It always starts a migration to the family room. Bottom line is a great tone that does not sound electronic, & well worth the money. Don't forget to double check your measurements
Date published: 2016-01-31
Rated 1 out of 5 by Bhascup from Great disappointment I never expected to be as dissatisfied with this purchase as I am. The first movement I received could never synchronize the number of hourly chimes with the actual hour. But I must say that a replacement was sent out to me promptly. The replacement work fine for a couple of weeks. Now it chimes only three notes each quarter hour. Never as it should and does not chime the hour at all. I would not feel as bad if this was a $10.00 item but it was much more. I hope to be able to get a refund when I am able to call customer service. I see no point in another replacement.
Date published: 2016-09-08
Rated 5 out of 5 by Dann from Tubular Quad Chime Quartz Clock Movement - 11/16" I bought this clock movement with the long shaft so I can mount the face on a 3/8" thick piece of acrylic plastic. This was so I can mount it in the clock box easier and also it would set the pendulum back a little more. I then very easily mounted the mechanism on the plastic using the canter nut and two #4 screws. I then installed the batteries and walla! the clock works! I chose the 4x4 Westminster and adjusted the volume. The volume was adjustable from very low to quite loud. I then followed the instructions very carefully to adjust the time. Again, success! I had bought the brass rod and bob for the pendulum and decided the rod was to mickey mouse. So I glued a 1/16" x 3/4" x 20" piece of wood onto it and stained it to match the clock box. I am very pleased with the finished results. Also I am impressed with the accuracy of the unit. The timing must be crystal controlled. Dan Allen
Date published: 2016-06-30
Rated 3 out of 5 by RobertF from Very Nice Tubular Chime Sound but There are Issues In my opinion this product is cheaply made for the price. I had to send the first movement back because the chimes would only play at the lowest volume setting. I received a replacement and the chimes would not play when the volume was set to approximately 60% or above. However I did not return the second movement because the volume set to about 50% was loud enough for me and I didn't want to go through the hassle of another return.
Date published: 2016-02-04
Rated 5 out of 5 by Marcuis from great item I bought this for a special project that I was working on and it worked great for me . I will buy more when needed!
Date published: 2016-02-27
Rated 4 out of 5 by Richard 1 from Authentic Very authentic chime sound. A little bit on the bright side, but nicer than most.
Date published: 2016-02-03
Rated 5 out of 5 by Larry G from Best sounding electronic movement The tubular quad chime quartz movement was packed well & received on time. I replaced a mechanical works in a Linden wall clock with a little modification. It keeps excellent time & the chime tone is just fantastic. It has chime volume, 4 different chimes & late night off switch.
Date published: 2016-07-17
Rated 4 out of 5 by Chucker from The movement Great product, great service Dept. I put movements in old , antique , faces. I have a hard time figuring out the shift length. Also setting time is not clear, changing batteries etc. That said you guys are the best.
Date published: 2016-02-02