You have no items in your shopping cart.
Clock Kit Includes:
- Imported hardwood case, pre-cut and sanded
- For use with a insert with a 2 3/8" mounting diameter
- 31 1/2"H x 14 1/4"W x 4 1/2"D
|Clock Kit Type||Wall Clock|
Tavern Clock Case is rated out of 5 by 2.
Rated 3 out of 5 by MarkW from Tavern Clock Kit This product is "Made In China." The machining of the wood is very good. Everything fits well. The chimes sound very cheap. The hour and minute hands are made from a very thin metal. They just barely keep from bending under their own weight. However, I did enjoy putting the kit together to keep me busy during the winter days. I cannot make a recommendation, one way or the other, to a friend. If you need something to putz with, it's OK. If you are after a quality clock, this one will not be to your liking.
Date published: 2016-02-12
Rated 4 out of 5 by den52 from
Date published: 2016-02-02
Would it be possible to get this clock with a glass insert at the bottom. As I would like to install a Pendulum (movement)?
Hi Glenice, we don't currently offer a glass insert at the bottom for this clock kit project.
Date published: 2016-09-21
Hi Klockit, Just wondering what the face diameter is i.e. between the wood as I have an existing face and movement that I would like to mount into something. Thanks, Mark
Hi Mark, the measurement you're asking for above is approximately 11 3/4". We hope this helps!
Date published: 2016-09-15
What is the part number for the movement as I need a replacement for my tavern clock
Hi Somojim, we recommend purchasing clock movement #12271. The original 5" clocks hands will not fit properly on the #12271 movement. A free pair of clock hands is included with the purchase of #12271 - we recommend the 3 3/4" or 3 7/8" pair. The other option you can go with is a non-chiming movement such as #10001, which will offer a wider selection of hand options. If you have any questions on this information, please contact us at 1-800-556-2548.
Date published: 2016-08-17
Can you assemble the clock without the tune and speaker?
Hi Becky, the clock movement that is provided with this clock case can be mounted without the speaker and chime box. It will come in three separate units with wires that can be taken off from the clock movement. Please contact us at 1-800-556-2548 with any questions on this information, we're happy to help!
Date published: 2016-04-04
Can the strike and chime be muted on this action?
I just finished the kit. The chime has separate batteries from the movement. I would guess that removal of the chime batteries would silence it and not affect the clock movement. If you decide to restart it, you would have to go through the chime/clock realignment procedure again.
Date published: 2016-02-13