You have no items in your shopping cart.
White in color.
Rubber Mounting Ring for Clock Inserts is rated out of 5 by 1.
Rated 4 out of 5 by Sammy from It served it's purpose. It's very difficult to get the measurements correct for a insert. Without the rubber ring the insert would not have fit.
Date published: 2016-02-01
How many gaskets can you put around a clock insert.
Hello Jand, unfortunately we have not tested the maximum amount of rubber gaskets which can be used on an insert. We do apologize for the inconvenience.
Date published: 2016-11-28
Is this soft rubber or hard?
Hi dejaone, the rubber ring #15612 is a soft rubber.
Date published: 2016-10-13
What size movement is this for?
This rubber mounting ring is designed for use with most of our clock inserts in the 2" range.
Date published: 2016-08-08
what is the inside and outside diameter ???
Hi Jake, the inside diameter is 4.63 and the outside diameter is 5 cm.
Date published: 2016-07-21
do these come in sizes? I made clocks a number of years ago and used the standard inserts 1 7/16. We make the clocks from polymer clay, and use the insert for the clock part. I use to get a metal cup for the insert to sit in. but would these work?
Hi Debbie, we do not currently a rubber ring that would work properly for our 1 7/16" clock inserts. This specific rubber ring is designed for use with the clock inserts in the 2" range.
Date published: 2016-06-20
What size insert is this ring suitable for? Also, does the 2-inch insert with a plastic backing require a rubber ring?
Hi Lucien, this clock insert can be used with any the clock inserts in our 2"-range. Our 2" clock insert #15286 will come with the rubber ring; you do not have to purchase separately.
Date published: 2016-06-15
Mounting hole is 1" deep x 2 5/16" wide. What size clock is best with this mounting ring.
Hi Jake, this rubber ring is designed for use with any of our clock inserts in the 2" range.
Date published: 2016-06-10
I am looking for a collar to make a 2-3/8" diameter clock-fit adjust into a 2 3/4"-diameter hole. Would this mounting ring work for that?
Hi Joyce, this rubber ring will add 1/8" to the mounting diameter. Our best advice would be to use this rubber ring plus rubber bands to achieve the mounting diameter you are looking for. Please contact us at 1-800-556-2548 with any questions on this information.
Date published: 2016-05-18