You have no items in your shopping cart.
- 5/16" shaft diameter
- 1 year warranty
- 3 AA batteries required
- Hand mounting hardware included
- Free pair of hour/minute hands, select after you add movement to cart
- Designed for use with a Group B sweep second hand
Case Size: 2 3/16"H x 2 7/32"W x 21/32"D
|Total Hand Shaft Length||1/2", 7/8"|
|Maximum Dial Thickness||1/16", 7/16"|
Quad Chime Trigger Quartz Clock Movement is rated out of 5 by 28.
Rated 5 out of 5 by Pastor Cheryl from Exceeded My Expectations Here in rural Alaska, I made seven rustic clocks for Christmas presents. Routed out a place for the chime and movement on the back and the clock insert plus decoration on the front. I wood burned the decorative routing on the front and around the clock insert area. They were very well received. Everyone loved the ability to turn the volume up or down and set the chimes to their preference. What I was very impressed with was the fact that the clock knows when it is 10 PM and it turns off the chime. The chime then starts up again at 6 AM. Even though I enjoy creating things with wood, this was my first attempt at making a clock.
Date published: 2016-02-02
Rated 4 out of 5 by s fogle from Good value for the money I like the transformation of my clock. Installation was not difficult but the directions were a little vague on how to get the chimes to sound correctly. 40 minutes after the hour was not what I wanted. I finally got it reset to on the hour and the correct number of chimes. I was a little disappointed that it did not chime the quarter and half hours but that was my misunderstanding. Volume is adequate at the highest setting with the speaker just setting inside the clock box and no hole or mounting made. For the price I paid, I am very pleased.
Date published: 2016-01-29
Rated 5 out of 5 by Nadine from Ok Clock Movement The clock performs as described. It's a slow chiming. I had previously had a similar clock works. It was faster and chimed on the quarter hour. This one does not as stated in the blurb. If I would not have had the older movement, this one would be fine, but miss my old chimes that wore out.
Date published: 2016-03-14
Rated 4 out of 5 by jeb74 from my experience with clock reair I purchased the repair parts and found installation to be easy. the directions were clear and easy to follow
Date published: 2016-02-23
Rated 5 out of 5 by Dunnite from Great movement. Great value I have had this unit now about four weeks. I love it and my wife loves it as well. I was replacing another brand of movement in a mantle clock which never kept accurate time. This one was easy to install and is right on the money regarding time. Strikes very clearly and distinctly.
Date published: 2016-02-25
Rated 5 out of 5 by RayAmaya from Perfect parts I had been looking for the chimes part for a Daniel Dakota chimes clock. I couldn't find anything that was close locally. The person at Klockit not only help me locate the correct parts but when I receive them, I was able to repair the clock to its original operating condition. These parts were perfect. They were the exact match to this clock. Thank you Klockit.
Date published: 2016-07-04
Rated 4 out of 5 by vafarmer from Easy to install I had an old chime mechanism that went dead. I've been looking for a replacement for some time and decided to try the Klockit Quad chime trigger movement. It fit right into the old clock and sounds very good. I didn't want a booming chime, just a quiet one that reminds me of the time. It does the job.
Date published: 2016-04-25
Rated 4 out of 5 by kpsychodoc from Easy to install I bought this as a replacement for a more expensive set of works which had stopped working. There was a speaker already mounted and it was easy to connect the speaker wires from this unit to the existing speaker. I don't think you could beat this unit in terms of price.
Date published: 2016-04-15