Minute Hand Nut Driver

No more fumbling, dropping or losing those tiny minute hand nuts! This handy tool picks up the nut from your work surface and grips it securely. You simply turn the tool like a screwdriver to tighten or loosen the nut on the shaft.
SKU: 99073

Availability: In stock




Can be used with the following movements:

  • Q-80 Quartz Movements: 10001-10004, 10043 & 10082
  • Electric Movements: 10111, 10119, 10123
  • High Torque Movements: 10114, 10115, 10107
  • 24-Hour Movement: 10016
  • Reverse Time Movement: 10035
  • Tide Movements: 10048, 10109

Additional Info

Additional Info



Minute Hand Nut Driver is rated 4.7 out of 5 by 6.
Rated 5 out of 5 by from my new screw driver I have not as yet got to use the screw driver,I'm to shaky to tackle this job, but I expect my son to come visit me then I have what he needs to fix it for me.I'm 88 years old & to shaky to do this myself ,thankyou for your quick service& the way your products are all displayed when looking for what we need.I am so happy that I found your place of business thank you so very much.
Date published: 2016-02-28
Rated 4 out of 5 by from Great concept; a bit over-priced. I've always found working with those tiny nuts that hold the minute hand on to be a bit tedious, so I was intrigued by this tool. For what it does, it's a handy time- (and nut-) saver. It proved too small for the first clock I tried it on, which was a German weight-driven wall clock with a loose minute hand. But to be fair, the product description doesn't say that it works on -all- clocks, and they do give a list of the movements it's known to work with. It works wonderfully on every electric clock movement to which I've applied it. Would have been five-stars, but I really feel that it's over-priced. It's only about 3 inches long, the chrome plating started flaking off after about the third use, and it didn't come with instructions -- I almost lost the internal spring before I figured out that I wasn't supposed to unscrew the back end. For $10, or even $15 this would be a good deal. At $27, it's more of a luxury than a necessity.
Date published: 2016-09-15
Rated 5 out of 5 by from Not a Miracle Tool, but Close! At first I thought this was way to expensive, but decided to give it a try. I have big mitts and trying to thread those micro nuts on the stem of the clock movement was impossible. I cross-threaded more than I want to admit. When I received the nut driver, I was immediately impressed with the quality! Needless to say, it worked like a dream. Worth every penny!
Date published: 2016-03-11
Rated 4 out of 5 by from Great tool It took me a year to decide to buy because of the price. Glad I finally did it, no more fighting the little nuts and end caps
Date published: 2016-02-14
Rated 5 out of 5 by from It 's a good tool & I really like it. It's much better than trying to use a pair of plyers.
Date published: 2016-01-21
  • y_2018, m_1, d_23, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_5
  • loc_en_US, sid_99073, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_klockit
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 68.18ms