Need help? Call us at 1-800-556-2549

Anniversary Clock Movement Set

This set includes a time and rotary pendulum movement, 3 1/4" diameter dial, clock hands, case, and rotary pendulum. Comes with instructions to create one for use with this movement. The mounted height of the movement is 7 3/8". The mounted width and depth is 4".
 
SKU: 10173

Availability: In stock

$29.99
  • Buy 10 for $28.49 each and save 6%
  • Buy 50 for $26.99 each and save 11%

Details

Details

  • 1 year warranty
  • 2 AA batteries required

Additional Info

Additional Info

Option Label No

Reviews

Gold Acrylic Quartz Anniversary Clock Movement is rated 3.0 out of 5 by 3.
Rated 1 out of 5 by from Looks Nice but looks are not everything I have purchased two of these both were for gifts, The motor for the rotary pendulum failed on both in a very short period of time. One of them i just reordered and the other i sent back under warranty, and now both have failed again even though the one would probably still be under warranty ITS JUST IS NOT WORTH THE BOTHER. Do not waste your time if you like the rotary pendulum, I imagine any kit with a similar unit would be no better.
Date published: 2016-05-17
Rated 4 out of 5 by from Nice clock, great gift I made the base from scrap oak and turned it on my lathe. The clock runs great and is a nice conversation piece. I had to restart the base unit about 3 times before it would run continuously. A good quality battery was the answer.
Date published: 2016-05-28
Rated 4 out of 5 by from Beautiful clock If you take your time and are gentle it goes together nice and is worth every penny.
Date published: 2016-05-29
  • y_2016, m_12, d_6, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_10173, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_klockit
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 9.18ms
  • REVIEWS, PRODUCT

Questions

I just need motor for anniversary clock. Do you have one. Don't need the kit.

Asked by: Jerry1951
Hello Jerry1951, we offer a Rotary Pendulum Drive Movement for anniversary clocks. The movement #10098 can be viewed in the link provided below. https://www.klockit.com/rotary-pendulum-drive-for-anniversary-clocks-1.html
Answered by: Klockit
Date published: 2016-12-07

I have a anniversary clock that does't work no more.It says quartz85 on back also a #w085/00675 ,and on front it says loricron .Please help me find the parts for it.It was a gift from late husband.

Asked by: butterfly56
Hello butterfly56, we do offer a replacement clock movement and anniversary movement for you clock. Please contact us at 1-800-556-2548 with the measurements below. We'll then be able to help you find the proper replacement for your clock. (1) Thickness of material the shaft will have to travel through including the clock face and any material the face will be mounted to (maximum dial thickness) (2) Total length of the hand shaft on the movement. Please measure the entire length of the shaft from the base of the movement where the shaft comes out of the movement to the tip where the hands attach to (total hand shaft length) (3) Your movement's case dimensions (4) Minute hand length from the center mount hole to the tip. We look forward to hearing from you!
Answered by: Klockit
Date published: 2016-11-15

Please e-mail link to instructions for Gold Acrylic Anniversary clock

Asked by: phillipmilks
Hi Phillip, we've emailed you a copy of the product instructions for this product.
Answered by: Klockit
Date published: 2016-07-12

What is the movement part number ?

Asked by: Gary65
Hi Gary, please order #10173 above. This set will include the clock movement.
Answered by: Klockit
Date published: 2016-06-13

I have one of your older anniversary clocks. It is rectangular with removable mirrored back panel and Swarovski crystal ball weights. It has stopped working and is discolored. Will item 10178 be a good replacement?

Asked by: Phil Block
Hi Phil, the #10173 offers slightly larger dimensions than the original #11061. Please check to see if your case can accept the new size of 7 3/8” H x 4” W x 4” D. The mounting holes on the #10173 are 3 1/4" each from center. The base plate holes are not centered, they are more towards the back of the plate (see the picture for a visual). If you have any further questions or concerns with this clock movement set, please feel free to contact us at 1-800-556-2548 or klockit@klockit.com.
Answered by: Klockit
Date published: 2016-05-11

I have Howard miller clock, similar to your quartz anniversary one. The rotating pendulum does pendulate. Do you have a replacement for this issue?

Asked by: Richardxyz
Hi Richard, we will need need more information about your Howard Miller clock to determine if our anniversary clock parts will be a good replacement. We will reach out to you soon via email.
Answered by: Klockit
Date published: 2016-05-09

what are the dimensions of the posts?  I am trying to replace the movement on my Montreux quartz clock.

Asked by: Tree1944
Which dimensions of the posts are you looking for? The posts go through the base and can be measured several ways. Please contact us at 1-800-556-2548 or klockit@klockit.com with more details. Thank you!
Answered by: Klockit
Date published: 2016-02-28

What aligns the stem to keep movement. Have bought one simular to the Quartz Anniversary Clock but the stem will not stand straight inorder for the bulbs? to go around

Asked by: cricket
The stem is attached to the movement and rotates the bulbs in a circular motion, similar to traditional timekeeping motors.
Answered by: Klockit
Date published: 2016-01-24
  • 2016-12-09T11:42CST
  • bvseo_cps, prod_bvqa, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_10173, PRD, sort_recentAnswersFirst
  • clientName_klockit
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 6.16ms
  • QUESTIONS, PRODUCT