You have no items in your shopping cart.
- 3 year warranty
- 1 377 battery included
- Mounting diameter: 1/4"
View more specifications in the Additional Info tab.
|Mounting System||Rubber Ring|
29/32" Silver Micro-Mini Seiko Clock Insert is rated out of 5 by 2.
Rated 4 out of 5 by Megalo22 from Excellent product The miniature clock was just as advertised and worked perfectly. Shipping was a bit much relative to the price of the item.
Date published: 2016-10-20
Rated 5 out of 5 by Emerson from Perfect for my projects I am very pleased with this product. Thank you for a speedy delivery.
Date published: 2016-10-02
What depth would need to be cut for this insert? would 0.200" deep be enough?
Hello Lesk, the mounting depth of the insert #15701 is 1/4". Thank you!
Date published: 2016-11-21
I have my Mother's pocket watch, which is missing gears and other parts! I have tried to find used parts to replace it, to no avail. Do you think I could fit-up this movement in it? Could I use the original dial? Sounds crazy, right!
We may be able to help you with this! Please measure the diameter of the hole in your Mother's pocket watch where you'd need to fit the clock insert into and then contact us at 1-800-556-2548 or firstname.lastname@example.org with that dimension - we'll assist you from there.
Date published: 2016-08-18
Do you have any that are 25/32?
Hi Lonna, we do not currently offer a clock insert with an overall or mounting diameter of 25/32". This clock insert fits into a 7/8" hole, so if your mounting diameter is 25/32", you'll need to add a rubber band to the back piece for a better fit. If you have any questions on this information, please feel free to contact us at 1-800-556-2548 or email@example.com.
Date published: 2016-07-19
I need to replace a clock insert that measures 15/16" opening in the glass clock holder. Will your 29/32" fit? The insert itself outside measurements are 1". The inside insert measurement is 15/16".
Hello, this clock insert has a mounting diameter of 7/8" which is a 1/4" shy of 15/16". A small rubber band on the back side is recommend to make up the difference needed to secure the insert in the mounting hole.
Date published: 2016-11-02
how to adjust the time in #15701 clock insert?
Hi Charley, please follow the steps below to adjust the time of the #15701 clock insert: · Remove the rubber ring from the backside of the clock insert · Remove white plastic tab from setting crown on the side of the clock insert · Pull the setting crown on the clock insert out. · Using your fingers, turn the crown clockwise or counterclockwise to set the insert to the correct time. · Once the time is set, push the crown back into the insert. · Once the crown is pushed back into the insert, the hands will engage and the insert will run. Please contact us at 1-800-556-2548 if you have any questions on this information.
Date published: 2016-04-19
Can you tell me how thick the bevel are? thanks
This clock insert does not have a bevel in the glass portion. Please check your email for more details.
Date published: 2016-04-08
Please confirm that this watch insert has an outer set wheel on rim at 3:00 position. Please advise airmail cost to send to Sydney Australia
This is a clock insert not a watch insert. The time set wheel is on the back of the clock insert. Please contact us at 1-800-556-2548 or firstname.lastname@example.org for a shipping quote to Sydney, AU.
Date published: 2016-02-01
please advise the location of stem and crown. do you have dimensioned sketch of external dimensions
Hi Willy, below are the dimensions of this Seiko clock insert: Overall Diameter: 29/32" Mounting Depth: 1/4" Mounting Diameter: 7/8" Please see this diagram for more information: http://www.klockit.com/pdfs/insert_specification_diagram.pdf
Date published: 2016-02-01