You have no items in your shopping cart.
11 1/2" Glass and Bezel Clock Insert
I have built a large 17 inch octagon wall clock frame to fit your 11-5/32 inch aluminum face and am interested in the 11-1/2 glass and bezel. From your picture I can't quite see how I'm going to mount it to my clock frame. I see only two pins. Tony
Hi Tony, two holes will need to be drilled into the case to allow the two metal prongs to pass through. The metal prongs are secured with the hardware provided. Peg length is 1 1/32".
Date published: 2016-10-07
Would you have a battery operated insert this size?i need to replace a clock in a beautiful case my father made years ago. Thank you. Anne Benda
Hi Anne, the largest clock insert we currently offer is in the 7" range. We may have an alternative for you if you're interested. If so, please contact us at 1-800-556-2548 or firstname.lastname@example.org.
Date published: 2016-07-26
can i buy glass only? AT WHAT PRICE.
We do not offer the glass only for this product. It comes as one piece.
Date published: 2016-07-18
Do you have a bezel like this one but made for a 10 1/2 inch dial. It needs to have the ability to be opened to wind the clock.
Hi Lucy, we do not offer this bezel in a smaller size. We do offer the Friction Fit Glass and Bezel in a 10 1/4" size, but it is smaller than what you are seeking.
Date published: 2016-06-22
I have a similar glass and bezel insert for a smaller clock. The glass has broken. The diameter of this bezel is 9 ⅞". Do you carry something of that size?
Hi George, we do not currently offer a glass and bezel that would measure 9 7/8" in diameter. The next best option we offer is #27034, that will have a 10 1/4" outside bezel: http://www.klockit.com/products/sku-27034.html
Date published: 2016-04-01
Is the hinge complete? I only see part of the hinge in the picture. I need it to be able to screw onto the case.
Hi Paul, the hinge is attached to the dial. Two screws go through the material and are secured with two lock nuts. We hope that helps! Please contact us at 1-800-556-2548 with any questions on this information.
Date published: 2016-03-04
RE 11-1/2-Inch Glass and Bezel Clock Insert. What is the measurement of the hinge, between the two "prongs?" My clock still has the hinge on it. The measurement with "springy ends" is 1". Will your insert fit?
Hi Paulette, there is 13/16" between the two prongs on this unit. We would need more information about your set up before answering your second question. Please contact us at 1-800-556-2548 or email@example.com.
Date published: 2016-02-29
will the 11 1/2 inch glass bezel clock insert work with the 9 1/2 in. school house regulator clock dial?
Yes, but there will be a large gap around the outer edge of the dial. Please contact us at 1-800-556-2548 with more details on what you're looking for so that we can help you find the right product.
Date published: 2016-02-17