 |
Proudly named for its designer, John Cooper—Klockit’s New Product
Development Manager, The Cooper Collection is our brand new line of
exclusive grandfather clock kits that can be customized!
Purchase everything separately—wood, grandfather clock movement, dial,
pendulum, weight shell set, and glass. You decide what to buy...and when!
The Cooper Collection blends solid hardwood construction with the most
innovative clock movement mounting system ever designed making each
clock movement incredibly easy to install and maintain.
Additional Features Only Found in the Cooper Collection Clocks:
• Clear grain, kiln dried North American Red Oak for all case parts
• Solid 3⁄4" thick Red Oak Rail & Stile Dial Panel Construction
• Case and Full Length Door made from 13⁄16" thick Red Oak Lumber
• Patent-Pending Movement Mounting System Works in Any Cooper
Collection Clock Case
• Special Placement of the Independent Sound Board for Enhanced
Chime Melody and Hour Strike Acoustics
• Cabinets Sized to run any Mechanical Movement for a full 7-8 Days
• Easy-to-Follow Written & Illustrated Instructions covering Clock Case
Assembly and Movement Setup, Calibration and Installation |
Brookwood Grandfather Kit
The Brookwood Grandfather Clock Kit offers your choice of grandfather mechanical movement, dial, pendulum and weight shell set (each sold separately). The full length flat beaded columns and antique brass hardware finish the clock with a timeless accent.
Movement Mounting System - Click for More Info
Shown with 13044 movement, 28044 dial, 19004 pendulum, 13107 weight shell set.
Wood: North American Red Oak
Stain/Finish Shown: Red oak stain with clear, satin sheen finish (your results may vary)
KIT INCLUDES all wood parts required, pre-cut, factory sanded up to 120 grit and ready for assembly. The kit will also include the hinges, door lock, key plate (escutcheon), skeleton key, glass retainer, grill cloth, leg levelers, all required assembly fasteners, pilot drill bits, glue, sandpaper and step by step assembly instructions and supporting assembly illustration booklet. This kit also includes Klockit's patented movement mounting system and plan specifications to build your own optional exterior mount stand out of common lumber.
GENERAL ASSEMBLY & WOOD FINISHING STEPS:
- Glue the front frame assembly to the side frame assemblies
- Secure the rear top and bottom cleats
- Mount the top panel and movement support cleats
- glue and assemble the base
- Mount the clock case assembly into the base assembly
- Glue the column end posts and columns to the case assembly
- Glue the trim plates to the top column end posts
- Secure the crown front plate and side returns
- Mount the crown molding pieces to the case assembly
- Mount the upper crown trim pieces
- Pre-mount the hinges and door lock
- Assemble the movement mounting system
- Stain and finish your clock
- Trim and mount the grill cloth to the grill panels
- Mount the dial board into place
- Install the mechanical movement of your selection
- Mount the glass panels and the lower raised wood panels
- Insert the grill panels and secure the upper/lower case backs
Finished Size: 78 3/4"H x 24 7/8"W x 14 5/16"D
| Category and Tools |
 |
Clamps |
Screwdriver |
Hand Drill |
Pliers |
Square |
Tape Measure |
Hammer |
Awl |
Category 5 is described as:- Includes our largest and most elaborate floor clocks.
- Generally recommended for those with the ability to work from detailed written and illustrated instructions.
- Progressive sub-assembly steps involved before final assembly.
- Final assembly and finishing will involve 15-20 hours of working and drying time.
- Can be completed over 2-3 weeks.
 Plan and Components Also Available
|
|
|
|
35344 Brookwood Grandfather Kit - The Cooper Collection
|
|
Price: $999.99
|
|
|
|
|
|
Shopping Cart
