


|
Collect gift cards at your next celebration with the Celebrations Keepsake Box. This beautiful keepsake clock keeps cards secure on your special day. The card box spins 360° to view three 8" x 10" panels that showcase photos of the guest of honor while the fourth panel holds a clock movement and either the included Celebrations dial or a custom created clock dial (custom dial sold separately, #99988). The top lid is lockable and hinged and holds a 5" x 7" photo. This gift card box is great for your next wedding, graduation, shower, anniversary or celebration.
Wood: Imported Hardwood
Stain/Finish Shown: Minwax Special Walnut (your results may vary)
KIT INCLUDES all wood parts required, pre-cut, factory sanded up to 120 grit and ready for assembly. The kit will also include assembly fasteners, surface mount lock with key and escutcheon plate, 8" x 10" glass panels, 5" x 7" glass panel, turn buttons, quartz movement and hardware, clock face, Lazy Susan turn table, hinge, clock hands, pilot drill bits, wood glue, sandpaper, AA battery and step by step assembly instructions with supporting assembly illustrations.
GENERAL ASSEMBLY & WOOD FINISHING STEPS:
- Glue and assemble the rear box frame
- Glue and assemble the front box frame
- Glue and assemble the two side frames
- Glue and assemble the front, back, and side frame pieces to the box floor panel
- Stain and finish
- Mount the Lazy Susan turn-table to the base plate
- Mount the base/turn-table assembly to the box and floor panel assembly
- Mount the continuous hinge to the mortise in the rear top rail
- Mount the box lid
- Mount the surface mount lock. Mount the 5" X 7" glass panel with turn-buttons
- Mount the 8" X 10" glass panels and secure in place with the backing panels and turn-buttons
- OPTIONAL: Assemble the clock option cleats
- OPTIONAL: Mount the clock movement, clock face, and hands
- OPTIONAL: To mount the clock movement/clock face assembly, remove the front 8X10 glass panel and backing
- OPTIONAL: Replace the 8" X 10" glass panel with the clock movement/clock face assembly. Secure the clock assembly with the clock option cleats and screws (do not glue)
Finished Size: 13 9/16"H x 11 7/16"W x 11 x 7/16"W
| Category and Tools |
 |
 Hand Drill |
 Screwdriver |
 Hammer |
 Pliers |
 Tape Measure |
 Square |
 Clamps |
Category 3 is described as:- Generally our larger mantel or wall clocks with mechanical clock movements.
- A number of sub-assembly steps involved before final assembly.
- Final assembly and finishing will include several hours of working and drying time.
- Can be completed over several days.
Plan and Components also Available
 |
|
|
|
34774 Celebrations Keepsake Box Kit
|
|
Price: $69.99
|
 |
|
|
 |
|