This breathtaking Grandfather Curio displays your finest collectibles with classic style on six glass shelves accented by interior lighting. Glass shelves are included in the kit. Doors offer easy access to both the clock and keepsakes. Plays Westminster, Whittington or St. Michaels. This kit is now available with three movement options. A movement, dial, pendulum, and weight shell set are included with each kit. Door glass and mirror set sold separately.

Wood: Ash

KIT INCLUDES all wood parts required, pre-cut, factory sanded up to 150 grit and ready for assembly. The kit will also include pulls, surface mount lock, key plate (escutcheon), skeleton key, leg levelers, glass retainer, all required fasteners for assembly, hinges, glass shelves, curio cabinet lighting, glue, sandpaper, fasteners and step by step assembly instructions with supporting assembly illustrations. Each kit will also include the movement, dial, hands, pendulum and weight shells.

GENERAL ASSEMBLY & WOOD FINISHING STEPS:

• Assemble the gable sides to the gable returns
• Assemble the base
• Glue the center rail between the left and right gable assemblies
• Secure the base assembly to the case assembly with glue and screws
• Glue the base overlay and return pieces to the assembled case
• Glue the center and lower back rails in place
• Mount the dial trim panel cleats
• Secure the movement mount board and supports
• Mount the top panel
• Mount the chime plate and stand-offs (not required for #35014)
• Mount the side gable door frames
• Secure the mirror retainer stiles and rails,/li>
• Mount the glass shelf supports
• Mount the gable doors
• Mount the front door
• Stain and finish
• Mount the glass panels and mirror
• Mount the interior cabinet lighting
• Mount the mechanical movement and accessories
• Secure the dial trim panel

Category and Tools
	Clamps	Screwdriver	Hand Drill	Square	Tape Measure	Hammer

Category 5 is described as:

• Includes our largest and most elaborate floor clocks.
• Generally recommended for those with the ability to work from detailed written and illustrated instructions.
• Progressive sub-assembly steps involved before final assembly.
• Final assembly and finishing will involve 15-20 hours of working and drying time.
• Can be completed over 2-3 weeks.