A beveled glass door and plain glass side panels allow easy viewing of our finest cable-driven, regulator pendulum movement (13037). Choose the kit or handcraft your own clock with our plan and components. Plays full Westminster melody on the hour progressive melody on the quarter-hours, and counts out the hours.

Finished Size: 41"H x 151/2"W x 9"D
Additional shipping charges apply for rush service. Please call for quote.

ASSEMBLY SUPPLIES REQUIRED:
• Square.
• Strap/band clamping, mitre corner clamp, "C" clamps or other adjustable clamps.
• Screwdrivers.
• Pilot drill bits (1/16" - 3/32" dia.) & hand drill.
• Small hammer.
• Needle nose pliers or small adjustable wrench.
• Stain and/or clear sealer finishes and applicators of your preference.
• Ruler or tape measure.
GENERAL ASSEMBLY & WOOD FINISHING STEPS:
The following assembly and finishing steps are easy to complete by just utilizing the illustrated and written instructions provided with the kit.
• Pre-assemble the crown frame parts.
• Pre-assemble the bottom pediment parts.
• Assemble the case side gables to the top/bottom case plates.
• Mount the crown to the case assembly.
• Mount the bottom pediment to the case assembly.
• Complete wood finishing.
• Mount the door hardware and door assembly to the clock case.
• Install door and gable glass.
• Mount the movement and chime rods into the clock case.
• Adjust the movement, set time, hang the clock on the wall and the pendulum on the clock movement.